VOLVO
ECM-P252A16 - Engine Oil Quality Sensor Circuit. General Electrical Failures. Circuit voltage below threshold
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (6)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The ECM monitors engine oil level and temperature with a single sensor that reads oil quality, level and temperature. The code is stored when the PWM signal from that sensor is incorrect, and the fault can lie in the supply, the signal wire or the sensor itself.
Możliwe przyczyny
- Supply open or shorted to voltage, or the signal wire is open or shorted to voltage (see ECM-P252A17)
- Contact resistance or oxidation in the connections (see ECM-P252A1C)
- Damaged oil level sensor
- Voltage supply short-circuited to ground
- Signal wire short-circuited to ground
- Intermittent open circuit in the signal wire (see ECM-P252A1C)
Co możesz zrobić
- 1Read the fault status with the ignition on and see whether the fault is still active. If it is not, the fault may have been intermittent
- 2Check that the relevant fuses are intact
- 3Check the connector to the combined sensor for contact resistance and oxidation
- 4Use a multimeter to check that the supply to the sensor has no open circuit and is not short-circuited to ground (body)
- 5If the fault remains after these checks, have a workshop with diagnostic equipment check the combined sensor
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.