VOLVO
ECM-P253300 - Ignition Switch Run/Start Position Circuit. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
- Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo V70 (2008–)2012–2015Tylko silnik: D4162T
Co oznacza ten kod błędu?
The ECM monitors the ignition position and the voltage levels at the inputs for the 15 and 50 supply. The code is stored when the ignition is in the start position but the ECM has never received voltage on the 15-supply input in position II. Possible causes are faulty circuits for the 15 or 50 supply.
Możliwe przyczyny
- Incorrect circuit for the 15 supply
- Incorrect circuit for the 50 supply
Co możesz zrobić
- 1Check that the relevant fuses are intact
- 2Check that the ignition switch works in position II and in the start position, and that it can be moved between the positions
- 3Use a multimeter to check that the 15-supply is present in position II and the 50-supply is present in the start position
- 4Check the connectors to the engine control module for contact resistance and oxidation
- 5If the fault remains, have a workshop check the 15 and 50 supply circuits
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.