VOLVO
ECM-P258382 - Cruise Control Front Distance Range Sensor. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (13)
- Volvo S60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo S60 (2011–)2015Tylko silnik: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Tylko silnik: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Tylko silnik: B6304T2, B6324S, B8444S
- Volvo V60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo V60 (2011–)2015Tylko silnik: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Tylko silnik: B6304T2, B6324S
- Volvo XC60 (2009–)2009–2010Tylko silnik: B6304T2
- Volvo XC60 (2009–)2011–2015Tylko silnik: B6304T4
- Volvo XC70 (2008–)2008Tylko silnik: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: B6304T2, B6324S
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S
- Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
The engine control module (ECM) receives information from the forward sensing module (FSM) all the time over the CAN network. This code is set when that communication stops. Even though the code is named after a sequence counter, it means the signal from the forward sensing module is not getting through.
Możliwe przyczyny
- Open circuit in the communication wire
- Communication wire shorted to ground or to supply voltage
- Contact resistance or oxidation at the connectors
- Open or short circuit at the connectors
Co możesz zrobić
- 1Read the codes across the whole car and fix the CAN-related codes first, as this code can be caused by them
- 2Check that the fuses are intact
- 3Check the wiring to the forward sensing module (FSM) for chafing, pinch damage and breaks
- 4Check that the connectors are firmly seated and free from oxidation
- 5If you have a diagnostic tool: check that the FSM appears and responds in the list of control modules
- 6If none of this finds anything, have a workshop with diagnostic equipment measure the communication on the CAN network
Objawy, które możesz zauważyć2
- Cruise control does not work at all
- Cruise control cannot be engaged
Na co może wpływać usterka1
- Cruise control is switched off while the fault is active
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.