VOLVO
ECM-P258500 - Fuel Additive Control Module Warning Lamp Request. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The engine control module (ECM) has received a request from the additive dosing module (ADM) to switch on the warning lamp. The ADM cannot light the lamp itself and has to go through the engine control module. The code is set when that request is received, and the fault may start in the ADM or the central electronic module (CEM).
Możliwe przyczyny
- Trouble codes stored in the additive dosing module (ADM)
- No power supply to the ADM
Co możesz zrobić
- 1Read the codes in the additive dosing module (ADM) first, then in the central electronic module (CEM)
- 2Fix the faults in the ADM and the CAN-related codes in the CEM; this code cannot be erased until they are fixed and erased
- 3Check that the ADM fuse is intact and that the module receives supply voltage
- 4Check the wiring and connectors to the ADM for chafing, breaks and loose connections
- 5If nothing is found, have a workshop with diagnostic equipment establish where the request is coming from
Objawy, które możesz zauważyć1
- Text message and warning symbol in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.