ECM-P259800
VOLVO
ECM-P259800 - Turbocharger Boost Control Position Sensor "A" Performance - Stuck Low. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
- Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo V70 (2008–)2012–2015Tylko silnik: D4162T
Co oznacza ten kod błędu?
The engine control module (ECM) requests a certain position for the turbo's guide vanes through a turbo control valve, and the position sensor measures where the vanes actually are. The code is set when the requested position does not match the measured one. Even though the code is named stuck low, it is the difference between requested and measured position that counts.
Możliwe przyczyny
- Clogged hoses to the turbocharger or turbo control valve
- Damaged vacuum pressure sensor
- Damaged turbocharger
Co możesz zrobić
- 1Check the hoses to the turbocharger and the turbo control valve for kinks, damage and blockages, since clogged hoses can cause this fault
- 2Check that the hoses are firmly attached and not pinched or loose
- 3If you have a diagnostic tool: compare the requested and measured guide vane positions in live data while the engine runs
- 4If the fault remains after the hoses are checked, have a workshop check the vacuum pressure sensor and the turbocharger
Objawy, które możesz zauważyć3
- Check engine light comes on or behaves abnormally
- Text message and warning symbol in the display
- The car feels sluggish or lacks power
Na co może wpływać usterka2
- Engine output and speed are limited
- Exhaust gas recirculation (EGR) control stops
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.