VOLVO
ECM-P261087 - ECM/PCM Internal Engine Off Timer Performance. Bus Signal / Message Failures. Missing message
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (32)
- Volvo S60 (2011–)2011–2012Tylko silnik: B6304T4
- Volvo S60 (2011–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Tylko silnik: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Tylko silnik: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Tylko silnik: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Tylko silnik: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012, 2015Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013–2014Tylko silnik: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Tylko silnik: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Tylko silnik: B6304T4
- Volvo V60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Tylko silnik: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Tylko silnik: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Tylko silnik: B6304T2, B6324S
- Volvo V70 (2008–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Tylko silnik: B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Tylko silnik: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Tylko silnik: B5204T9, B6304T4
- Volvo XC60 (2009–)2009Tylko silnik: B6304T2
- Volvo XC60 (2009–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2014Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Tylko silnik: B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2008Tylko silnik: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: B6304T2, B6324S
- Volvo XC70 (2008–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S
- Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
This code is set when the engine control module (ECM) receives no time at all from the central electronic module (CEM) over the CAN network. The module then uses its own calculated time instead, which is based on how the engine and intake air temperatures have changed.
Możliwe przyczyny
- A fault that other diagnostics in the engine control module have found, e.g. on the engine temperature or intake air pressure sensor
- A fault that the CEM has found itself
- Break in one of the CAN wires
- Short circuit between the CAN wires
- Internal fault in the CEM, the engine control module or another module on the same part of the CAN network
Co możesz zrobić
- 1Read the codes in the CEM and fix the ones found there first, since this code may be caused by them
- 2Check that the connectors on the CAN network are firmly seated and free from corrosion
- 3Use a multimeter to check that the CAN wires have no break and are not shorted
- 4If you have a diagnostic tool: check that the CEM can communicate with the tool
- 5If the code returns, have a workshop with diagnostic equipment find which control module on the CAN network disturbs the communication
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Na co może wpływać usterka1
- The calculated time is used instead
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.