VOLVO
ECM-P263200 - Fuel Pump "B" Control Circuit/Open. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Tylko silnik: B4204T11
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11
Co oznacza ten kod błędu?
The engine control module (ECM) sets fuel pressure through the fuel pump control module (PEM) using a PWM signal. This code concerns fuel pump B and is set when the PWM link from the engine control module to the fuel pump module has no signal.
Możliwe przyczyny
- Open circuit in the signal wire
- Damaged fuel pump control module
Co możesz zrobić
- 1If you have a diagnostic tool: read the frozen values and fault counter of the code to see when the fault occurred
- 2Check that the fuse for the fuel pump is intact
- 3Check the connectors and the wire between the engine control module and the fuel pump control module for breaks and chafing
- 4If you have a diagnostic tool, read the fuel pressure in live data and see whether it follows the pressure the engine control module requests
- 5If nothing is found, have a workshop check the fuel pump control module
Objawy, które możesz zauważyć2
- Engine cranks but does not start
- Engine may stall while driving
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.