VOLVO
ECM-P263500 - Fuel Pump "A" Low Flow / Performance. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Tylko silnik: B4204T11
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11
Co oznacza ten kod błędu?
The code is set when the actual fuel pressure does not reach the lowest permitted level. The fuel pressure is controlled through the fuel pump control module with a PWM signal, and the cause is a damaged high-pressure pump, which then cannot deliver enough fuel.
Możliwe przyczyny
- Damaged high-pressure pump
Co możesz zrobić
- 1If you have a diagnostic tool: read the frozen values and fault counter of the code to see how often it has occurred
- 2Check that there is enough fuel in the tank
- 3If you have a diagnostic tool: read the actual fuel pressure in live data with the engine running and see whether it is low
- 4If nothing is found, have a workshop decide whether the high-pressure pump needs replacing
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Na co może wpływać usterka1
- The high-pressure pump does not deliver enough fuel
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.