ECM-P263662
VOLVO
ECM-P263662 - Fuel Pump B Low Flow / Performance. Algorithm Based Failures. Signal compare failure
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (20)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
The engine control module (ECM) regulates fuel pressure through the fuel pump control module using a PWM signal. The code is set when the regulation reaches its lowest value and the wanted fuel pressure is still not reached. The cause may lie in the fuel lines, the pressure sensor, the pump or the pump control module.
Możliwe przyczyny
- Leakage in the fuel lines
- Damaged fuel pressure sensor
- Damaged fuel pump
- Damaged fuel pump control module
Co możesz zrobić
- 1Deal first with any stored codes for the fuel pressure sensor or the atmospheric pressure sensor
- 2Check that there is enough fuel in the tank, since an almost empty tank can give too low a pressure
- 3Look at the fuel hoses and the fuel filter for clogging and leaks
- 4Check the connectors between the fuel pump control module and the fuel pump for contact resistance and oxidation
- 5Check the fuel pressure sensor connector for contact resistance and oxidation
- 6If nothing is found, have a workshop measure the fuel pressure and decide whether the pump, the pressure sensor or the control module needs replacing
Objawy, które możesz zauważyć5
- Check engine light comes on or behaves abnormally
- Driving feels poor or the car lacks power
- Engine stalls while driving, at unpredictable times or all the time
- Engine stalls at idle, at unpredictable times or all the time
- Engine stalls when starting
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.