Co oznacza kod błędu ECM-P268012?

Diagnostyka i definicja kodu błędu dla ECM-P268012 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S80 (2007–)). Zamów naprawę w OBD Tuning.

VOLVO

ECM-P268012 - Coolant Degassing Valve Control Circuit High. General Electrical Failures. Circuit short to battery

Układ

Sterownik silnika (ECM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

6 modeli

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)

Pokaż modele wg rocznika i silnika (11)

Co oznacza ten kod błędu?

The engine control module (ECM) drives the solenoid for the Degas valve, which regulates engine temperature more efficiently. The code is set when the signal is higher than a set level as the solenoid is activated. The cause may be a signal wire shorted to supply voltage, a damaged solenoid, a damaged connector or the engine control module.

Możliwe przyczyny

Signal wire shorted to supply voltage
Damaged solenoid
Damaged connector
Damaged engine control module (ECM)

Co możesz zrobić

1Check that the fuse for the solenoid has not blown
2Use a multimeter to check that the signal wire to the solenoid has no contact with the positive supply
3Check the connector at the solenoid for damage
4If you have a diagnostic tool: read the control signal to the solenoid in live data when it is activated
5If nothing is found, have a workshop with diagnostic equipment decide whether the fault lies in the solenoid or the engine control module

Objawy, które możesz zauważyć2

Air conditioning does not work
Heater does not work

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.