VOLVO
ECM-P26DB00 - Engine Sound Control "A" Circuit/Open. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
6 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo S60 (2011–)2015Tylko silnik: B6304T4, B6304T5
- Volvo S80 (2007–)2011–2015Tylko silnik: B6304T4
- Volvo V60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo V60 (2011–)2015Tylko silnik: B6304T4, B6304T5
- Volvo V70 (2008–)2011–2015Tylko silnik: B6304T4
- Volvo XC60 (2009–)2011–2015Tylko silnik: B6304T4
- Volvo XC70 (2008–)2011–2015Tylko silnik: B6304T4
Co oznacza ten kod błędu?
The engine control module (ECM) controls two exhaust dampers, one for each exhaust bank, which affect the engine sound. The code concerns the circuit for damper A and is set when the signal to the damper is missing.
Możliwe przyczyny
- Contact resistance and oxidation in the connections
- Open circuit in the signal wire
- The damaged exhaust damper
- Exhaust damper A is on the right-hand side as seen in the direction of travel
Co możesz zrobić
- 1Check that the fuses are intact; their location is shown in the owner's manual
- 2Check that the connector to damper A is secure and free from oxidation and contact resistance
- 3Use a multimeter to check that the signal wire to damper A has no break to the engine control module
- 4With a diagnostic tool you can activate damper A and listen for it moving
- 5Have a workshop check damper A if the fault remains after the connector and wiring checks
Objawy, które możesz zauważyć3
- Unusual noise while driving, sometimes or all the time
- Unusual noise when the engine is switched off
- Unusual noise during acceleration
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.