VOLVO
ECM-P300111 - Hybrid/EV Electronics Coolant Valve #1. General Electrical Failures. Circuit short to ground
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The code concerns valve 1 in the cooling circuit for the drive components of the hybrid, which the engine control module (ECM) monitors continuously. If the valve does not work, cooling of the electric drive components may stop. The code is set when the signal wire to the valve is shorted to ground or has an open circuit.
Możliwe przyczyny
- Mechanical fault on the valve
- Electrical fault on the valve
- Short circuit or open circuit in the wires to the valve
Co możesz zrobić
- 1Check that the fuses are intact; their location is shown in the owner's manual
- 2Check the connectors to the valve for contact resistance and oxidation
- 3Use a multimeter to check that the wires to the valve have no break and no contact with ground (the body)
- 4With a diagnostic tool, activate the valve in the cooling circuit and listen or feel whether it moves
- 5Have a workshop check the valve if the fault remains, since a mechanical fault in the valve is a possible cause
Objawy, które możesz zauważyć2
- The combustion engine runs in HYBRID mode more often than expected
- Warning symbol and text message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.