VOLVO
ECM-U002900 - Vehicle Communication Bus "A" Performance. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The engine control module (ECM) compares its configuration ID with the signal setup that the central electronic module (CEM) sends on the CAN network. The code concerns communication on the sensor CAN and is set when the IDs do not match.
Możliwe przyczyny
- Faulty CAN configuration ID, for example if a used engine control module with different software or hardware has been fitted to the car
- Open circuit in the CAN network
Co możesz zrobić
- 1Read the code with a diagnostic tool and check whether it is active or only stored
- 2Tell the workshop if the engine control module has recently been replaced, since a module that is not intended for the car can cause the code
- 3Use a multimeter to check that the CAN wires have no break
- 4Check the connectors to the engine control module for contact resistance, looseness and oxidation
- 5Have a workshop check that the engine control module has the right software and configuration for the car
Objawy, które możesz zauważyć1
- Red warning symbol and text message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.