ECM-U011000
VOLVO
ECM-U011000 - Lost Communication With Drive Motor Control Module. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Tylko silnik: D4164T
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Tylko silnik: D4164T
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
Even though the code is named lost communication with the drive motor control module, it concerns the communication with the alternator control module (ACM) over the LIN network. The engine control module (ECM) sets the code when it detects a fault in that communication, and then the charging warning may light up.
Możliwe przyczyny
- Contact resistance or oxidation in the connectors
- Damaged alternator control module (ACM)
- Open circuit in the signal wire
Co możesz zrobić
- 1Read the code with a diagnostic tool while the engine is running, since the fault is checked then
- 2Check the connectors at the alternator and at the engine control module for contact resistance and oxidation
- 3Look for chafed wiring on the signal wire between the engine control module and the alternator control module
- 4Use a multimeter to check that the signal wire has no break
- 5Have a workshop check the alternator control module if the fault remains
Objawy, które możesz zauważyć1
- Charging warning light comes on or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.