VOLVO
ECM-U012165 - Lost Communication With Brake Control Module. Algorithm Based Failures. Signal has too few transitions / events
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelS60 (2011–)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
The engine control module (ECM) receives information from the brake control module (BCM) over the CAN network, and the code is set when a fault is registered in the communication between them. Although the code is titled lost communication with the brake control module, it concerns CAN traffic linking the engine control module and the brake control module. The fault can stop the cruise control from working.
Możliwe przyczyny
- Fault in the brake control module (BCM)
- Break or short circuit on the CAN wires between the engine control module and the brake control module
Co możesz zrobić
- 1Read the codes in the central electronics control module and other affected control modules, and fix them first. Then clear this code
- 2Check that the fuses are intact
- 3Check the CAN connections between the engine control module and the brake control module for loose or corroded contacts
- 4Look for chafed wiring in the CAN network. Use a multimeter to check that the wires have no break or short circuit
- 5Do not work on the braking system yourself. If the fault returns: have a workshop with diagnostic equipment check the brake control module and the CAN network
Objawy, które możesz zauważyć2
- The cruise control does not engage
- The cruise control does not hold the set speed and disengages
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.