VOLVO
ECM-U012600 - Lost Communication With Steering Angle Sensor Module. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (26)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011Wszystkie silniki oprócz: B5254T5, B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2008–2009Tylko silnik: B4204S3, B4204S4, D4204T
- Volvo S80 (2007–)2010Tylko silnik: B4204S3, B4204S4, B4204T6, D4204T
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204S3, B4204S4, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2015Tylko silnik: B4164T, D4162T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011Wszystkie silniki oprócz: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Wszystkie silniki oprócz: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3, D4162T
- Volvo V70 (2008–)2008–2009Tylko silnik: B4204S3, B4204S4, D4204T
- Volvo V70 (2008–)2010Tylko silnik: B4204S3, B4204S4, B4204T6, D4204T
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204S3, B4204S4, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2, D4162T
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
The engine control module (ECM) continuously receives steering angle information from the steering angle sensor module (SAS) over the CAN network. The code is set when communication with the steering angle sensor is disturbed or stops, or when the signal from it is faulty. The fault gives no noticeable symptoms for the driver.
Możliwe przyczyny
- Disturbances or breaks on the CAN network
- Fault in the steering angle sensor module (SAS)
Co możesz zrobić
- 1Read the codes in the engine control module and the steering angle sensor module, and fix other CAN-related codes first
- 2Check that the fuses are intact
- 3Check the CAN connectors at the engine control module and the steering angle sensor for loose or corroded contacts
- 4Look for chafed or pinched CAN wires. Use a multimeter to check that they have no break or short to ground or supply voltage
- 5If you have a diagnostic tool: follow the steering angle in live data and check that the value changes smoothly as the wheel is turned from lock to lock
- 6Do not work on the steering system yourself. If the fault returns: have a workshop with diagnostic equipment check the steering angle sensor and the CAN network
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.