VOLVO
ECM-U014087 - Lost communication with Central Electronic Module (CEM). Bus Signal / Message Failures. Missing message
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
14 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (37)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D5204T, D5204T5
- Volvo S60 (2011–)2011Tylko silnik: B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Tylko silnik: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5
- Volvo S80 (2007–)2011Tylko silnik: B6304T4, B6324S4, B6324S5, D5204T2, D5244T10
- Volvo S80 (2007–)2012Tylko silnik: B6304T4, B6324S4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Wszystkie silniki oprócz: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2014Tylko silnik: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Tylko silnik: B6304T4, B6324S4, B6324S5, D5204T3, D5244T15
- Volvo V40 (2013–)2013Wszystkie silniki oprócz: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014Wszystkie silniki oprócz: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Tylko silnik: B5204T8, B5204T9, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Wszystkie silniki oprócz: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015Wszystkie silniki oprócz: B4164T, B4204T11, D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D5204T, D5204T5
- Volvo V60 (2011–)2011Tylko silnik: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Tylko silnik: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2014Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4162T, D4204T5
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2011Tylko silnik: B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012Tylko silnik: B6304T4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Wszystkie silniki oprócz: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2014Wszystkie silniki oprócz: B4164T, B4164T2, B4204T11, B4204T7, D4162T, D4204T5
- Volvo V70 (2008–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4204T11, D4162T, D4204T5
- Volvo XC60 (2009–)2011–2012Wszystkie silniki oprócz: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Wszystkie silniki oprócz: B4204T7
- Volvo XC60 (2009–)2014–2015Wszystkie silniki oprócz: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo XC70 (2008–)2011–2013
- Volvo XC70 (2008–)2014–2015Wszystkie silniki oprócz: B4204T11, D4204T5
- Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
The central electronics control module (CEM) sends a signal over the CAN network to the engine control module, stating whether the parking brake is applied or not. Although the code is titled missing message, it is set when the signal from the CEM is faulty. The code applies to cars with a mechanical parking brake.
Możliwe przyczyny
- Fault in the central electronics control module (CEM)
- Fault in the link from the parking brake to the central electronics control module
- Break in one of the CAN network wires
- Contact resistance or oxidation in the contacts
- One of the CAN wires is shorted to ground or to supply voltage
- The CAN wires are shorted to each other
Co możesz zrobić
- 1Read the codes in the central electronics control module and first fix any communication faults there
- 2Check that the link to the parking brake and the central electronics control module is secure and clean
- 3Check the CAN network connectors for contact resistance and oxidation
- 4Look for chafed CAN wires. Use a multimeter to check that they have no break or short to ground, supply voltage or each other
- 5Do not work on the parking brake yourself. If the fault returns: have a workshop with diagnostic equipment check the parking brake, the central electronics control module and the CAN network
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.