Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-U028400
    VOLVO

    ECM-U028400 - Lost Communication with Active Grille Air Shutter Module "A". General Failure Information. No sub type information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    4 modele

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–)

    Pokaż modele wg rocznika i silnika (15)
    • Volvo S60 (2011–)2011Tylko silnik: D5204T2
    • Volvo S60 (2011–)2012Tylko silnik: D5204T3
    • Volvo S60 (2011–)2013Tylko silnik: D5204T3, D5204T7
    • Volvo S60 (2011–)2014–2015Tylko silnik: D4162T, D5204T3, D5204T7
    • Volvo V40 (2013–)2013Tylko silnik: D5204T4, D5204T6
    • Volvo V40 (2013–)2014Tylko silnik: D4162T, D5204T4, D5204T6
    • Volvo V40 (2013–)2015Tylko silnik: D4162T, D4204T14, D5204T6
    • Volvo V40 Cross Country (2013–)2013Tylko silnik: D5204T4, D5204T6
    • Volvo V40 Cross Country (2013–)2014Tylko silnik: D4162T, D5204T4, D5204T6
    • Volvo V40 Cross Country (2013–)2015Tylko silnik: D4162T, D4204T14, D5204T6
    • Volvo V60 (2011–)2011Tylko silnik: D5204T2
    • Volvo V60 (2011–)2012Tylko silnik: D5204T3
    • Volvo V60 (2011–)2013Tylko silnik: D5204T3, D5204T7, D82PHEV
    • Volvo V60 (2011–)2014Tylko silnik: D4162T, D5204T3, D5204T7, D82PHEV
    • Volvo V60 (2011–)2015Tylko silnik: D4162T, D5204T3, D5204T7, D82PHEV, D87PHEV

    Co oznacza ten kod błędu?

    The engine control module (ECM) sets the opening of the grille shutter through the active grille shutter control module (AGM) over LIN. The code is set when the engine control module has no communication with the AGM. Fault codes from the AGM are stored in the engine control module's memory.

    Możliwe przyczyny

    • Break or short to ground on the supply voltage to the AGM
    • Break in the LIN connection between the engine control module and the AGM
    • Internal fault in the AGM

    Co możesz zrobić

    1. 1First check for active fault codes in the shutter control module, as they are stored in the engine control module
    2. 2Check that the shutter slats are clean and free from dirt, snow, ice and other objects
    3. 3Check visually that the linkage to the shutter slats is secure. If it is loose, the shutter cannot open or close
    4. 4Check that the fuses are intact and that the connectors are tight, clean and not oxidised
    5. 5Look for chafed wiring. Use a multimeter to check that the LIN and earth wires have no break or short to ground or supply voltage
    6. 6With a diagnostic tool, do not start the engine until the shutter command has finished. If it returns, have a workshop check the module

    Objawy, które możesz zauważyć1

    • Fuel consumption is abnormally high

    Na co może wpływać usterka1

    • The electric cooling fan may run slightly faster than normal, as it is controlled by a calculated value

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.