VOLVO
ECM-U040100 - Invalid Data Received From Engine control module. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (17)
- Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Tylko silnik: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B5254T10
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2008Tylko silnik: B5254T6
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Tylko silnik: B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B5254T10
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
Co oznacza ten kod błędu?
The engine control module (ECM) is configured using the vehicle configuration from the central electronics control module (CEM). The code is set when the ECM detects an internal fault, or when a parameter sent by the CEM is faulty. Although the code is titled invalid data received from the engine control module, it concerns the ECM's own faults and the parameters it receives.
Możliwe przyczyny
- A module or function was removed or fitted without the vehicle configuration being correctly updated
- Faulty engine control module
Co możesz zrobić
- 1Check whether any control module or function has recently been changed, removed or added. If so, the car's configuration may need updating by a workshop
- 2Check that the fuses are intact and that the battery has good voltage
- 3If you have a diagnostic tool: read the status indicators and freeze-frame values to see whether the fault is present now and when it occurred
- 4If the fault returns: have a workshop with diagnostic equipment check the engine control module and its configuration
Objawy, które możesz zauważyć2
- The engine does not start
- Text message and warning symbol in the display
Na co może wpływać usterka1
- A default value is used for the faulty parameter
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.