ECM-U041541
VOLVO
ECM-U041541 - Brake Pedal Switch Circuit. Bus Signal / Message Failures. Value of signal protection calculation incorrect
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleS60 (2011–), S80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5
- Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Tylko silnik: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B5254T10
- Volvo V70 (2008–)2008Tylko silnik: B5254T6
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Tylko silnik: B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B5254T10
Co oznacza ten kod błędu?
The engine control module (ECM) receives brake pedal status from the brake control module (BCM) over CAN, including from a cancel switch fitted to cars with adaptive cruise control. The code is set when the signal from that cancel switch is judged to be faulty. The code can also be set during a CAN communication fault, in which case it appears together with other codes. Although the code is titled brake pedal switch circuit, it concerns the cancel switch.
Możliwe przyczyny
- Fault in the brake control module (BCM), which should be checked first
- Fault on the CAN network
Co możesz zrobić
- 1Read the codes in the brake control module and the engine control module. Troubleshoot the CAN-related codes first
- 2Check that the fuses are intact
- 3Check the CAN connectors between the engine control module and the brake control module for oxidation and loose contacts
- 4Use a multimeter to check that the CAN wires have no break or short to ground or supply voltage
- 5Do not work on the braking system yourself. If it returns: have a workshop check the brake module and the cancel switch
Objawy, które możesz zauważyć1
- The cruise control does not engage
Na co może wpływać usterka1
- The cruise control is switched off while the fault is active
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.