VOLVO
ECM-U1A0400 - Vehicle Speed CAN Signal. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Co oznacza ten kod błędu?
The engine control module (ECM) monitors the speed signal that arrives over CAN. The code is set when the ECM gets a signal that data from the BCM or the TCM cannot be trusted, or when the speed signal over CAN is faulty. The fault therefore lies in the speed data from the BCM or the TCM.
Możliwe przyczyny
- The fault is in the brake control module (BCM)
- The fault is in the transmission control module (TCM)
Co możesz zrobić
- 1Read the fault codes in the brake control module (BCM) and remedy them first.
- 2Read the fault codes in the transmission control module (TCM) and troubleshoot according to them.
- 3Check that the fuses are intact and that the connectors to the BCM and TCM are secure and clean.
- 4Do not work on the brake system yourself. Have a workshop check the BCM if the code returns.
Objawy, które możesz zauważyć3
- The check engine lamp lights up or behaves abnormally
- Warning symbol and message in the display
- The emissions warning lamp is lit
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.