VOLVO
ECM-U200582 - Vehicle Speed. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (12)
- Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011–2014Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4204T7
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
If the brake control module (BCM) detects a fault on the speed signal, it sends a fault message to the engine control module (ECM), which then sets its own code. Although the fault is named a sequence counter problem, it concerns a fault that the BCM has detected on the speed signal. A matching code for the wheel speed sensor signal is also stored in the BCM.
Możliwe przyczyny
- Contact resistance in the CAN connections
- Open circuit in one or both CAN cables
- One or both signal cables are short-circuited to ground, to voltage or to each other
- Damaged brake control module (BCM)
- Damaged engine control module (ECM)
Co możesz zrobić
- 1Read the fault codes in the engine control module. If any of ECM-U012088, ECM-U000188, ECM-U1A1400, ECM-U000108 or ECM-U000100 is stored, investigate it first.
- 2Read the fault codes in the brake control module (BCM) and troubleshoot the speed sensor signal there first. The engine control module code is then a follow-on fault.
- 3Check that the connectors in the CAN network are secure and clean, and look for chafed wiring.
- 4Do not work on the brake system yourself. Have a workshop check the BCM and the speed sensor if the code returns.
Objawy, które możesz zauważyć1
- The check engine lamp lights up or behaves abnormally
Na co może wpływać usterka1
- The BCM's speed signal is replaced by a substitute value
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.