VOLVO
ECM-U210763 - Collision Mitigation By Braking. Algorithm Based Failures. Circuit / component protection time-out
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelS80 (2007–)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
The engine control module (ECM) gets signals from the forward sensing module (FSM) and applies braking help when a collision threatens. The code is set when a request for braking the car has been active for too long. Although the fault is named a circuit or component protection time-out, the code concerns how long the braking request lasts. It is set after the fault has been stored in the FSM or the central electronic module (CEM).
Możliwe przyczyny
- The fault is in the forward sensing module (FSM)
- The fault is in the central electronic module (CEM)
Co możesz zrobić
- 1Read the fault codes in the FSM and CEM first and remedy them. This code can be erased only once the root fault is remedied and its fault code erased.
- 2No troubleshooting has been developed for this code. If it returns after the repair, have a workshop read out and troubleshoot the system with diagnostic equipment.
- 3Erase the fault codes once the root fault is remedied, then check on a test drive whether the code returns.
Objawy, które możesz zauważyć1
- Message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.