VOLVO
ECM-U210766 - Collision Mitigation By Braking. Algorithm Based Failures. Signal has too many transitions / events
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelS80 (2007–)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
The engine control module (ECM) gets signals from the forward sensing module (FSM) and applies braking help when a collision threatens. The code is set when the adaptive cruise control function is switched on and off too often. Although the fault is named a signal with too many transitions, the code concerns how often the function is switched on and off. It is set after the fault has been stored in the FSM or the central electronic module (CEM).
Możliwe przyczyny
- The fault is in the forward sensing module (FSM)
- The fault is in the central electronic module (CEM)
Co możesz zrobić
- 1Read the fault codes in the FSM and CEM and remedy them first. This code can be erased only once the root fault is remedied and its fault code erased.
- 2No troubleshooting has been developed for this code. Have a workshop read out and troubleshoot the FSM and CEM if the code returns.
- 3Erase the code after the root fault is remedied, then check on a test drive whether it returns.
Objawy, które możesz zauważyć1
- Message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.