VOLVO
EFI-0013 - Intake air temperature (IAT) sensor. Faulty signal
Układ
Elektroniczny wtrysk paliwa (EFI)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS40 (1996–2004), V40 (1996–2004)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The intake air temperature sensor measures the temperature of the air entering the engine. The code is set when the signal from the sensor is faulty, which may be caused by a defective sensor, a short-circuit in the signal wire, or an open circuit in the wire.
Możliwe przyczyny
- Defective intake air temperature (IAT) sensor
- Signal wire short-circuited to ground or supply voltage
- Open circuit in the signal wire
- Contact resistance
Co możesz zrobić
- 1Check the connectors to the intake air temperature sensor and the control module for contact resistance and oxidation, and remedy them.
- 2With a diagnostic tool, read the intake air temperature with the ignition on. It should match the outside air after the car has stood.
- 3With a multimeter, check that the signal wire is not broken and not short-circuited to ground or voltage.
- 4If no fault is found, the temperature sensor needs replacing. Have a workshop do the replacement.
Objawy, które możesz zauważyć1
- The malfunction indicator lamp lights up
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.