VOLVO
ICM-B100F8F - Video Input "B". Bus Signal / Message Failures. Erratic
Układ
Moduł sterowania multimediami (ICM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
ICM talks to the parking camera (PAC) over composite video on video input B. The code is set when ICM detects a faulty video signal, and the fault appears irregularly. The camera picture can therefore be unstable even when it does not disappear altogether.
Możliwe przyczyny
- Sync signal from the CVBS video input reaches the control module incorrectly
- Loose connection on the composite video cable (CVBS) where it meets the control module
- Damaged wire running from the control module to the CVBS video input
Co możesz zrobić
- 1Check that the fuses are intact. Their positions are in the owner's manual or on the fuse box cover
- 2Test the camera view with the buttons, controls or a drive, and note when the picture gets worse
- 3Check that the connectors at video input B and at the parking camera are seated firmly and not oxidised. Move them gently while watching the picture
- 4Inspect the video wire for chafing and breaks where it passes edges or moving parts. With a diagnostic tool, run the quick test and check whether the code returns
Objawy, które możesz zauważyć3
- Other video problems
- Poor image quality or no picture on the front screen
- Rear entertainment does not work, works partly or works incorrectly
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.