Co oznacza kod błędu IEM-B200413?

Diagnostyka i definicja kodu błędu dla IEM-B200413 (Volvo V60 (2011–), Volvo V60 (2011–)). Zamów naprawę w OBD Tuning.

VOLVO

IEM-B200413 - Low Voltage Connector. General Electrical Failures. Circuit open

Układ

Nieznany układ / Specyficzny dla marki

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

1 model

V60 (2011–)

Pokaż modele wg rocznika i silnika (2)

Co oznacza ten kod błędu?

Although the code is named low voltage connector, it applies to the signals from the temperature sensor and the position sensor in the electric rear axle (ERAD). The IEM control unit sets the code when the temperature signal is missing or too low, or when the position sensor signal is wrong. Electric propulsion is then not possible.

Możliwe przyczyny

Loose contacts, contact resistance or oxidation at the joints between the ERAD and the voltage converter (ISC)
Open circuit in the signal cable
Signal cable short-circuited to ground
Damaged wiring between the ERAD and the ISC
Internal fault in the electric rear axle (ERAD)
Internal fault in the voltage converter (ISC)

Co możesz zrobić

1Have a workshop check the connectors and signal wires between the electric rear axle and the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
2If you have a diagnostic tool: look at the temperature readings from the electric rear axle in live data and see whether any of them is missing or stays constantly low
3Do not carry out any work or measurements on the wiring to the electric rear axle yourself
4Have a workshop read out the fault codes after the repair and check that the code is not stored again

Objawy, które możesz zauważyć4

Warning window with a warning symbol and text message in the display
Drive mode PURE disengages automatically or is unavailable
Drive mode AWD disengages automatically or is unavailable
Drive mode HYBRID: the combustion engine is active all the time or too often

Na co może wpływać usterka2

Electric propulsion is not possible
Brake energy regeneration from the electric rear axle is not possible

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.