VOLVO
IEM-B201192 - High Voltage DC Sensor. Component Failures. Performance or incorrect operation
Układ
Nieznany układ / Specyficzny dla marki
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The electric rear axle drive control module (IEM) monitors the high voltage system and the functions that belong to it. The code concerns a high voltage DC sensor and is set when one or more components do not work as they should. The cause lies in the voltage converter (ISC). Electric propulsion is then not possible.
Możliwe przyczyny
- Internal fault in the voltage converter (ISC)
Co możesz zrobić
- 1Have a workshop read the fault codes and check the high voltage sensor and the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
- 2If you have a diagnostic tool: read the high voltage system voltage in live data while the car is in drive mode and see whether it looks reasonable
- 3Do not carry out any work on the high voltage system yourself
- 4After the repair, check that the code is not stored again and that electric propulsion works
Objawy, które możesz zauważyć4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Na co może wpływać usterka2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.