VOLVO
IEM-P117144 - Rotor Sensor. System Internal Failures. Data memory failure
Układ
Nieznany układ / Specyficzny dla marki
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
An internal memory fault has occurred in the electric rear axle drive control module (IEM). The fault is set with the ignition on once the control module's test has started. Although the code is named rotor sensor, it concerns the memory in the IEM. The cause lies in the voltage converter (ISC). Electric propulsion is then not possible.
Możliwe przyczyny
- Internal fault in the voltage converter (ISC)
Co możesz zrobić
- 1Have a workshop read the fault codes in the IEM and check the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
- 2Do not carry out any work on the high voltage system yourself
- 3If you have a diagnostic tool: read the fault codes with the ignition on and see whether the code is still there
- 4After the repair, check that the code is not stored again
Objawy, które możesz zauważyć4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Na co może wpływać usterka2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.