VOLVO
IEM-P218184 - Cooling System Performance. Bus Signal / Message Failures. Signal below allowable range
Układ
Nieznany układ / Specyficzny dla marki
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
Although the code is named cooling system, it applies when the cooling system signal from the engine control module (ECM) is missing or too low. It is set with the ignition on once the test has started. The causes are a damaged coolant pump, a damaged coolant temperature sensor, or a software fault in the ECM or in the IEM. Electric propulsion is then not possible.
Możliwe przyczyny
- Damaged coolant pump
- Damaged coolant temperature sensor
- Software fault in the engine control module (ECM)
- Software fault in the electric rear axle drive control module (IEM)
Co możesz zrobić
- 1Check the coolant level and look for leaks in the cooling system
- 2Have a workshop read the fault codes in the engine control module (ECM) and check the coolant pump and the temperature sensor. High voltage systems may only be handled by qualified personnel
- 3Have a workshop download new software to the ECM and to the IEM if needed. Do not carry out any work on the high voltage system yourself
- 4After the repair, read out the fault codes with the ignition on and check that the code is not stored again
Objawy, które możesz zauważyć4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Na co może wpływać usterka2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.