VOLVO
IEM-U040168 - Invalid Data Received From Engine control module. Algorithm Based Failures. Event information
Układ
Nieznany układ / Specyficzny dla marki
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The electric rear axle drive module (IEM) is not getting at least one signal from the engine control module (ECM). Although the code is named invalid data, it is the signals that are absent. The fault is only checked once the test has started at ignition on, and the code is stored when the conditions are met.
Możliwe przyczyny
- Oxidation, contact resistance or loose contacts at the terminals to HS CAN or Sensor CAN
- Damaged cables on HS CAN or Sensor CAN
- Software error in the electric rear axle drive module (IEM)
- Software fault in the engine control module (ECM)
- Internal fault inside the ISC voltage converter
Co możesz zrobić
- 1Read out and note the code, clear it and road test to see whether it returns
- 2Have a workshop check that the connectors on HS CAN and Sensor CAN are fully engaged and free from corrosion
- 3Have a workshop check chafed or damaged CAN cables
- 4Have a workshop with diagnostic equipment check communication with the engine control module and load the latest software to the control modules if needed
- 5Do not work on the electric rear axle or its high voltage system yourself; have a workshop carry out those checks
Objawy, które możesz zauważyć4
- Warning symbol and text message in the display
- PURE drive mode disengages by itself or is not available
- AWD drive mode disengages by itself or is not available
- HYBRID drive mode runs with the combustion engine active all the time or too often
Na co może wpływać usterka2
- Electric propulsion is not possible
- Brake energy recovery from the electric rear axle ERAD is not possible
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.