VOLVO
IGM-B200992 - Insulated Gate Bipolar Transistor. Component Failures. Performance or incorrect operation
Układ
Nieznany układ / Specyficzny dla marki
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The high voltage generator control module (IGM) measures the temperature of its high voltage transistors with three sensors built into the control module. The code is stored when one or more of the sensors show a temperature that is too low. The fault is only checked once the test has started at ignition on.
Możliwe przyczyny
- The internal temperature of the control module is too low
- Internal fault inside the ISC voltage converter
Co możesz zrobić
- 1Read out, clear the code and start the car to see whether it returns
- 2If you have diagnostic equipment: check in live data that the IGM temperatures are reasonably even across the three sensors
- 3Have a workshop check the ISC voltage converter, as it may also have an internal fault
- 4The high voltage system may only be handled by a workshop; do not work on it yourself
Objawy, które możesz zauważyć5
- Warning symbol and text message in the display
- Warning about power supply problems from the alternator and charge regulator
- Charging of the high voltage battery while driving is absent, reduced or not working correctly
- High voltage battery is discharged or charges poorly
- HYBRID drive mode: the combustion engine is active all the time or too often
Na co może wpływać usterka1
- The high voltage battery cannot be charged by the combustion engine
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.