VOLVO
IGM-B201048 - Electric Machine. System Internal Failures. Supervision software failure
Układ
Nieznany układ / Specyficzny dla marki
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
Although the code is named a fault in the supervision software, it concerns a memory error in the IGM control module. The control module's internal memory holds, among other things, the vehicle configuration and calibration data. The fault is only checked once the test has started at ignition on.
Możliwe przyczyny
- Damaged or incorrect internal memory
- Software fault in the IGM
- Internal fault inside the ISC voltage converter
Co możesz zrobić
- 1Read out, clear the code and start the car to see whether it returns
- 2Have a workshop check the control module's memory and reprogram the module if needed
- 3The high voltage system may only be handled by a workshop; do not work on it yourself
Objawy, które możesz zauważyć5
- Warning symbol and text message in the display
- Warning about power supply problems from the alternator and charge regulator
- Charging of the high voltage battery while driving is absent, reduced or not working correctly
- High voltage battery is discharged or charges poorly
- HYBRID drive mode: the combustion engine is active all the time or too often
Na co może wpływać usterka1
- The high voltage battery cannot be charged by the combustion engine
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.