VOLVO
IGM-B201211 - Phase Current Sensors. General Electrical Failures. Circuit short to ground
Układ
Nieznany układ / Specyficzny dla marki
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The high voltage generator control module (IGM) monitors its internal components and related functions. The code concerns the phase current sensor signal in the voltage conversion unit ISC, which is either missing or incorrect. The fault is only checked while the combustion engine is running.
Możliwe przyczyny
- Internal fault inside the ISC voltage converter
Co możesz zrobić
- 1Read out, clear the code and run the car with the engine on to see whether it returns
- 2Have a workshop check the ISC voltage converter, since the phase current sensor is located in it
- 3The high voltage system may only be handled by a workshop; do not work on it yourself
Objawy, które możesz zauważyć5
- Warning symbol and text message in the display
- Warning about power supply problems from the alternator and charge regulator
- Charging of the high voltage battery while driving is absent, reduced or not working correctly
- High voltage battery is discharged or charges poorly
- HYBRID drive mode: the combustion engine is active all the time or too often
Na co może wpływać usterka1
- The high voltage battery cannot be charged by the combustion engine
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.