VOLVO
KVM-0003 - Receiver. No communication
Układ
Moduł dostępu bezkluczykowego (KVM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The keyless vehicle module (KVM) checks communication with the remote keyless entry receiver used for the key fob and the keyless functions. The code is stored when that communication is faulty or the receiver does not respond at all. The remote control then stops working, and the fault may lie in the wiring to the receiver or in the receiver itself.
Możliwe przyczyny
- Faulty communication with remote keyless entry (RKE) receiver
- No response from the remote keyless entry (RKE) receiver
Co możesz zrobić
- 1Read and note the code, clear it and test the car with the remote control
- 2With the ignition on, check that the signal wire to the receiver has no open circuit or short to supply voltage or ground, and repair that wire if it is damaged
- 3Make sure the connectors at the receiver are secure and free from moisture and corrosion
- 4Have a workshop with diagnostic equipment confirm the fault and replace the receiver, as it is probably faulty when no other fault is found
Objawy, które możesz zauważyć1
- The car cannot be operated with the remote control
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.