VOLVO
KVM-0005 - Remote control receiver. No communication
Układ
Moduł dostępu bezkluczykowego (KVM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The keyless vehicle module (KVM) checks communication with the remote keyless entry receiver used for the remote control and the keyless functions. The code is stored when the module registers that the signal is incorrect during key activity. The remote control is affected, and the cause may be a damaged wiring run or a failed receiver.
Możliwe przyczyny
- Signal wire shorted to supply voltage
- Signal wire shorted to ground
Co możesz zrobić
- 1Read the code, clear it and test the remote control
- 2Check the power and ground wiring to the receiver and look for open circuits and shorts to supply voltage or ground in the wiring to the CEM
- 3Make sure the connectors are secure and free from corrosion
- 4Switch the ignition on and test again. If the signal wire is open or shorted, repair that wire
- 5Have a workshop with diagnostic equipment check and replace the module if no other fault is found
Objawy, które możesz zauważyć1
- The car cannot be operated with the remote control
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.