VOLVO
KVM-B10CE24 - Right front Latch clutch switch. General Signal Failures. Signal stuck high
Układ
Moduł dostępu bezkluczykowego (KVM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The switch for the right front lock cylinder has been activated for too long, meaning its signal has stayed high. The code is stored when the time becomes too long, and it points to the switch, the handle or the wiring. The driver normally does not notice the code.
Możliwe przyczyny
- Damaged switch
- The right front handle has been held pulled out for an unusually long time
- The signal wire has a short to ground
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the handle returns to its rest position and is not damaged or held by dirt or ice
- 3With the ignition off, use a multimeter to check that the wire to the switch is not connected to ground (the body)
- 4With a diagnostic tool, read the switch value in live data while you use the lock cylinder, and check it changes
- 5Have a workshop replace the switch if it is damaged and the wire is sound
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.