Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    KVM-B135631
    VOLVO

    KVM-B135631 - Left Rear Door Handle Lock Circuit. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. No signal

    Układ

    Moduł dostępu bezkluczykowego (KVM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo S60 (2011–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015

    Co oznacza ten kod błędu?

    Each outer door handle carries a lock sensor and an unlock sensor, which the keyless vehicle module (KVM) monitors. The code is stored when no lock signal, or a wrong one, comes from the handle on the left rear door. Locking, unlocking and central locking from that handle then fail, and the fault appears while the engine runs and the car moves fast enough.

    Możliwe przyczyny

    • The signal wire has a short to supply voltage
    • The signal wire has a short to ground
    • Open circuit in the signal wire

    Co możesz zrobić

    1. 1Read the code, clear it and run the engine to check whether it returns
    2. 2Check the fuse for the circuit
    3. 3With the ignition off, check with a multimeter that the common handle-sensor ground wire is not shorted to supply voltage or ground
    4. 4Use a multimeter to check that the wires between the left rear handle and the KVM have no open circuit and are not shorted to supply voltage or ground
    5. 5If you have a diagnostic tool: check the lock sensor in live data and see that the value changes when the lock button on the handle is pressed and released
    6. 6Have a workshop replace the door handle if the wiring is sound, and the KVM if the fault remains after the replacement

    Objawy, które możesz zauważyć1

    • Locking, unlocking and central locking do not work

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.