Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    KVM-B137024
    VOLVO

    KVM-B137024 - Door Handle Ground Supply. General Signal Failures. Signal stuck low

    Układ

    Moduł dostępu bezkluczykowego (KVM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo S60 (2011–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015

    Co oznacza ten kod błędu?

    The keyless vehicle module (KVM) watches the shared ground wire for the lock and unlock sensors in the outer door handles. The code is stored when that wire reads constantly low, which means it is not getting a proper ground. Locking, unlocking and central locking then do not work, and the fault can appear while the engine runs and the car is driven.

    Możliwe przyczyny

    • The wire is shorted to ground
    • Open circuit in the wire

    Co możesz zrobić

    1. 1Read and clear the code, then run the engine to see whether it comes back
    2. 2Check the fuse for the circuit
    3. 3With the ignition off, use a multimeter to check the shared ground wire for an open circuit or a short to ground
    4. 4With a diagnostic tool, read the shared ground wire status in live data while locking and unlocking with the remote
    5. 5Have a workshop check the wire and replace the KVM if the fault remains once the wire is sound

    Objawy, które możesz zauważyć1

    • Locking, unlocking and central locking do not work

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.