VOLVO
OBC-P0D6781 - Battery Charger Control Module Performance. Bus Signal / Message Failures. Invalid serial data received
Układ
Ładowarka pokładowa (OBC)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The battery charger control module (OBC) monitors its internal functions and its communication with the gateway. The fault is set when the control module detects an internal fault or when communication is missing. The fault is caused by damaged charging components, and charging the high voltage battery is not possible while it remains.
Możliwe przyczyny
- Charging components are damaged
Co możesz zrobić
- 1Read out and erase the fault code, charge again and see whether it comes back
- 2Check that the charging cable is not damaged and that the correct type of charging cable is used
- 3Have a workshop check that the charging socket in the car is not damaged and that the cable is fully seated in it
- 4Have a workshop check the wiring between the charging socket and the control module OBC, and the charging components. The high voltage system may only be handled by authorised personnel
Objawy, które możesz zauważyć2
- Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
- The LED on the charging cable or the charging socket shows a fault and charging is reduced
Na co może wpływać usterka1
- Charging the high voltage battery is not possible
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.