VOLVO
PAC-B100E87 - Video Input "A". Bus Signal / Message Failures. Missing message
Układ
Układ napędowy (Silnik i skrzynia biegów)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The parking assistance camera module (PAC) passes the picture from the camera on to the control module for the front display. The fault is set when the video signal from the camera is missing. The fault can come from a loose connection, a damaged wire, the camera receiving no power or a damaged camera.
Możliwe przyczyny
- Poor contact where the video cable attaches to the camera or control module
- Damaged wire between the control module and the camera
- The camera receives no power
- Damaged wire
- Damaged camera
Co możesz zrobić
- 1Check that the fuses are intact and that the connectors at the camera and the control module are firmly seated and not oxidised
- 2Check that the wire between the control module and the camera is not damaged
- 3Read out and erase the fault code, test drive with reverse gear engaged and see whether it comes back
- 4Have a workshop check that the camera receives power, and replace it if it is damaged
Objawy, które możesz zauważyć1
- Front and rear park assist does not work
Na co może wpływać usterka1
- The control module for the front display (HLDF) shows a single-colour picture
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.