VOLVO
PAC-U010087 - Lost Communication With Engine control module. Bus Signal / Message Failures. Missing message
Układ
Układ napędowy (Silnik i skrzynia biegów)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The parking assistance camera module (PAC) normally receives continuous information from the engine control module (ECM) over the CAN network. The fault is set when communication with the ECM is disturbed or missing. The fault can come from a missing or broken voltage supply or ground to the ECM, contact resistance, broken or short-circuited CAN wires, or an ECM that does not suit the car. The parking camera does not work while the fault remains.
Możliwe przyczyny
- No power reaches the engine control module (ECM)
- Open circuit in the ground wire to the engine control module (ECM)
- Contact resistance in the connections
- Open circuit or short circuit in the CAN wires
- The engine control module (ECM) does not match this car, such as a second-hand unit with other software or hardware
Co możesz zrobić
- 1Check that the fuses are intact and that the earth points are firmly fixed and not oxidised
- 2Erase the fault code and test drive the car. If it comes back, the fault needs following up by a workshop
- 3Has the engine control module (ECM) been replaced recently? Tell the workshop, since it then needs the right software
- 4Have a workshop check the power supply, the earth and the CAN wires to the engine control module, and download new software if needed
Objawy, które możesz zauważyć1
- The parking camera does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.