VOLVO
PAC-U012187 - Lost Communication With Brake Control Module. Bus Signal / Message Failures. Missing message
Układ
Układ napędowy (Silnik i skrzynia biegów)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The parking assistance camera module (PAC) talks to the brake control module (BCM) non-stop. The fault is set when communication with the BCM is disturbed or missing. The fault can come from a missing voltage supply or ground to the brake control module, contact resistance, broken or short-circuited CAN wires, or a brake control module that is not intended for the car.
Możliwe przyczyny
- No power reaches the brake control module (BCM)
- Open circuit in the ground wire to the brake control module (BCM)
- Contact resistance in the connections
- Open circuit or short circuit in the CAN wires
- The brake control module (BCM) does not match this car, such as a second-hand unit with other software or hardware
Co możesz zrobić
- 1Check that the fuses are intact and that the earth points to the brake control module are firmly fixed and not oxidised
- 2Erase the fault code and test drive the car to see whether it comes back
- 3Has the brake control module been replaced recently? Tell the workshop, since it then needs the right software
- 4Have a workshop check the power supply and the CAN wires to the brake control module. The braking system is safety-critical, so do not work on the brake control module yourself
Objawy, które możesz zauważyć1
- The parking camera does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.