VOLVO
PAM-0008 - Parking sensor 4. Signal too high
Układ
Asystent parkowania (PAM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The parking assistance module (PAM) monitors the signal coming from parking sensor 4, which sits in the outer right rear part of the bumper. If the voltage on the signal wire is too high, the code is set and parking assistance from that sensor does not work.
Możliwe przyczyny
- Short circuit to supply voltage in the signal wire or in the connectors between the module and the sensor
- Short circuit to supply voltage in the sensor itself
- Open circuit in the ground wire or in the connectors between the module and the sensor
Co możesz zrobić
- 1Check the sensor connector and the wiring behind the bumper for damage and moisture
- 2Check that the sensor is secure in the bumper and not damaged
- 3Check the signal wire for a short to supply voltage and the ground wire for an open circuit with diagnostic equipment
- 4Replace the parking sensor if the wiring is intact but the fault remains
Objawy, które możesz zauważyć2
- The information lamp is lit
- Message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.