VOLVO
PAM-U000155 - High Speed CAN Communication Bus. System Programming Failures. Not configured
Układ
Asystent parkowania (PAM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The parking assistance module (PAM) has a signal configuration ID that does not match the one the central electronic module (CEM) sends out. The fault indicates that a control module from another car has been fitted, and the module needs to be loaded with the correct software.
Możliwe przyczyny
- Incorrect configuration ID, since the unit was never meant for this car, for instance a second-hand unit with other software or hardware
Co możesz zrobić
- 1Consider whether the parking assistance module has been replaced with a used control module, as the code indicates this
- 2Read the code, clear it and switch the ignition on; wait a while and read the codes again to see whether it is still stored
- 3If the code remains, have a workshop load the parking assistance module with the correct software
- 4If the code is still stored after reprogramming, have a workshop load new software into the central electronic module (CEM) and check again
- 5Drive the car for a while after the work and read the codes again
Objawy, które możesz zauważyć3
- Front or rear parking assistance does not work
- Yellow warning symbol and text message in the display
- Text message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.