VOLVO
PAM-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
Układ
Asystent parkowania (PAM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The parking assistance module has not received information about the car's current configuration from the central electronic module (CEM), so the configuration is not complete. The fault points to contact resistance, oxidation, a break or a loose contact in the connections to the CAN network, and the central electronic module should be traced first.
Możliwe przyczyny
- Contact resistance, oxidation, a break or a loose contact in the connections to the CAN network
- The fault lies in the sending control module, the central electronic module (CEM)
Co możesz zrobić
- 1Read and clear the code, then test drive the car to see whether it comes back
- 2If you have a diagnostic tool, check first whether codes are stored in the central electronic module (CEM)
- 3Check that the connections to the CAN network, at the parking assistance module and at the central electronic module, are firmly seated and free from oxidation
- 4Have a workshop check the CAN wires between the parking assistance module and the central electronic module for breaks
- 5Have a workshop trace the central electronic module and replace it only if it has an internal fault
Objawy, które możesz zauważyć3
- Front or rear parking assistance does not work
- Yellow warning symbol and text message in the display
- Text message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.