VOLVO
PBM-C006228 - Longitudinal Acceleration Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
Układ
Układ napędowy (Silnik i skrzynia biegów)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The Park Brake Module (PBM) checks its internal components. The fault code is stored when the module registers a wrong offset value, meaning that the zero level of the signal is off. The fault can be caused by the control module being installed incorrectly or by a fault inside it.
Możliwe przyczyny
- The control module is installed incorrectly
- A fault inside the Park Brake Module (PBM)
Co możesz zrobić
- 1Read the fault code, clear it and test drive the car to see whether it returns
- 2Check that the control module is firmly installed and that its connectors are secure
- 3If the fault returns despite correct installation, have a workshop replace the Park Brake Module (PBM)
- 4The parking brake is a safety function: have a workshop check it if it does not engage or release as it should
Objawy, które możesz zauważyć2
- Text message with a warning symbol in the display
- Parking brake does not work, works reduced, or works incorrectly
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.