VOLVO
PBM-P061E67 - Internal Control Module Brake Signal Performance. Algorithm Based Failures. Signal incorrect after event
Układ
Układ napędowy (Silnik i skrzynia biegów)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The parking brake module (PBM) continuously receives brake system information from the brake control module (BCM) and from the central electronic module (CEM) over the CAN bus. The fault code is stored when the information from either of them has a lower quality than the parking brake module accepts for a longer time, or when communication with the CEM stops. The fault therefore lies in the information from another control module.
Możliwe przyczyny
- Fault in the control module that sends the information, for example the brake control module (BCM) or the CEM
Co możesz zrobić
- 1Read the fault code, clear it and test drive the car using the parking brake to see whether it returns
- 2If you have a diagnostic tool: check whether the brake control module (BCM) and the CEM also have fault codes, since faults often show up in several control modules
- 3Check that the connectors at the parking brake control module are firmly fitted and not corroded
- 4If the fault returns, have a workshop troubleshoot the control module that sends the faulty information
- 5The parking brake is a safety function: have a workshop check it if it does not work as it should
Objawy, które możesz zauważyć3
- Information lamp is on
- Message in the text display
- Electric parking brake works with reduced function
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.