VOLVO
PDM-B108783 - LIN Bus "A". Bus Signal / Message Failures. Value of signal protection calculation incorrect
Układ
Moduł drzwi pasażera (PDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Co oznacza ten kod błędu?
The passenger door module (PDM) sends and receives information over the LIN bus to the control module in the left or right rear door, depending on whether the car is left- or right-hand drive. It has registered that the transmitted information has been corrupted, because the checksum does not match. The fault can affect the electric windows and central locking.
Możliwe przyczyny
- Communication interference
Co możesz zrobić
- 1Check that the fuses are intact
- 2Try the windows, the central locking and the switches in the doors to see which functions work
- 3Look for damage and loose connections in the wiring harness to the rear doors
- 4If you have a diagnostic tool, read the fault codes in the passenger door module and the rear door modules and see which of them have fault codes
- 5Remedy as needed, then road test the car to see whether the fault code returns
Objawy, które możesz zauważyć4
- Electric windows do not work, work reduced or work incorrectly
- Central locking with the button in the door panel does not work
- Locking and unlocking with the central locking does not work
- Switch indication does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.