VOLVO
PDM-B108F23 - Cabin Lock/Unlock Switch. General Signal Failures. Signal stuck low
Układ
Moduł drzwi pasażera (PDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The door modules on the driver and passenger sides monitor the central lock switch in the cabin. The fault is stored if the button has been held pressed for more than two minutes, and then the central locking does not work at all.
Możliwe przyczyny
- Button has jammed in the pressed-in position
- Control panel is damaged
Co możesz zrobić
- 1Check that the central lock button is not stuck in the pressed-in position and that it returns when you release it
- 2Look for damage to the control panel around the button
- 3Check that the fuses are intact
- 4If you have a diagnostic tool, see in live data that the signal from the central lock button changes when you press and release the button
- 5After the work, check that the central locking locks and unlocks the car when you use the button
Objawy, które możesz zauważyć1
- Central locking does not work at all
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.